User's Manual

2) The “Dest.”meas destination file whose name must be in

accordance with the selected file, whose extension is

“.TXT”;

3) Pressing [FILE] can reselect the file which will to be

exported.Here can only select the file in instrument

internal;

4) Press [EXPORT] to start to export data. In the

processing of the exporting, the number is refreshing

constantly until finishing the exporting. The exported

file needs to be opened and proceed in the transport

software.

5) Press [ESC] to return to “Import/Export” menu.

11.4.3 Import coordinate from PC

You can import the coordinate date from PC to the working

file or known coordinate data by transport software.

1) In the “Import/Export” menu, press [3] or press [ENT]

after moving the interface of “Import coord<=Port” to

enter the interface of “Import”, as shown in picture

below. The default file name is the current working

file;

Import

Baud.:

File:

Number:

115200

JOB1.DAT

↓

IMPORT

↑ FILE

2) Pressing [↑] or [↓] can change the baudrate of the

communication .You must keep the baudrate of

instrument and it of transport software, or you will

import data unsuccessfully;

3) Press [FILE] to enter the interface of “Select disk”;