User's Manual
Table Of Contents
- 1.Product Introduction
- 2.Function description
- 3. AT command instructions
- 3.1.Basic AT commands
- 3.2.WI-FI related AT commands
- 3.3.TCP/IP Related AT commands
- 3.3.8.Set the framing length of the serial port：at+uartp
- 3.3.9.Set the framing time of the serial port：at+uartpac
- 3.4.BLE related AT commands
- 3.5.Custom message prompt instruction
- Note：This type of command does not have a message
- The maximum length supports 30 bytes. Do not inclu
- 4.AT command control code example
- 5.Bluetooth distribution network and data transparen
- 6.Module power consumption measured data
- 7.Appendix A Document Revision History
User Manual
第 26 页 共 30
HLK-B35
6.2. Power consumption of transparent data transmission in Sta mode
Pic 18 Bluetooth broadcast is turned on, and the module acts as a working current for the client
to connect to the remote server and continuously send data
6.3. Power consumption in AP mode
Pic19 Bluetooth broadcast is turned on, the module is used as the working current of the server