User Manual

Chapter 2 Quick Start
Hi-G-Tek Ltd. Micro electronics & Asset Tracking Technology - 25 -
explained below), and send another command called "Set" that prepares the
DataSeal for normal operation.
This section describes how to prepare a single DataSeal. If you have more
than one DataSeal, repeat all the instructions in this section for each
Dat aSeal you have.
In order to send the Hard Wakeup command to the DataSeal or DataSeals
do the following:
Click on the
button on the tool bar to open the
window shown in Figure 2-3.
Figure 2-3 - All Commands W indow.