User Manual

Chapter 8 System Parameters and Comm ands
Hi-G-Tek Ltd. Micro electronics & Asset Tracking Technology - 167 -
8.2.1 The DataSeal Status Flags
The Long Status Parameter of the DataReader is a 32-bit value which each
bit represents a specific flag of Status. T he Short Status Parameter is the 8
most significant bits of the Long Status.
Below are the descriptions of each of the Status flags: (All the flags are
included in t he Long Status, and the first 8 are also included in the Short
Status)
Tampered
Seal Object Property Tampered
Mne moni c S /T
Description
This flag gets set when the Sealing
Wire is opened or its electrical
resistance changes. It is cleared only by
one of the Set commands.
Constant in
HGTSe alShortStatusBitEnum
HGTTamperedShort (80h)
Constant in
HGTSe alLongStatusBitEnum
HGTStatusTampered (80000000h)
Low Battery Warning
Se al O bject Prope rty LowB atte ryW arning
Mne moni c LBW