User Manual

Chapter 8 System Parameters and Comm ands
- 164 - Hi-G-Tek Ltd. Micro electro nic s & A sset Tra cking Techno logy
Default Value
0
Remarks
If the value of this Parameter is 0, then Re a d (Footprint) Event record are
alway s wr it t en .
The purpose of this Parameter is to prevent too many Event records to be
written if a DataReader performs a Ve ri fy command wit h Footprint
cyclically.
See the DataReader's SYS Parameter, and the Re a d Event fo r furt her
details.
Tp (Wakeup Time Interval in Deep Sleep Mode)
Seal O bject Property
Tp (hidden property)
Access
Read & Write.
Description
The interval in which the DataSeal
wakes up in Deep Sleep Mode, in order
to check for a HF Hard Wakeup RF
command.
Constant in
HGTSe alParameterC ode Enum
HGTTp (32h)
Verify Mask in
HGTVerifyMaskEnum
(not supported).
Data Type
Long. Max value: 65535. Unit is
1/1.024ms (0.976ms).
Default Value
10000 (9.766 seconds)
Remarks
In Deep Sleep mode, the DataSeal wakes up in the interval specified by this
Parameter, to check for a Hard Wakeu p command in HF.