User's Manual

Hi-G-Tek Ltd. Microelectronics & Asset Tracking Technology

189

7.8.4. Setting the System Session Duration

7.8.5. Setting the Command Parameters

System session duration is automatically set by the system upon

initiation. This may be changed by the User in accordance with

specific requirements.

Command parameters are initially determined by the system, and

appear in HEX format in the Command Data window box after a

Command Code has been selected. If necessary, parameters may

be changed in accordance with the User's requirements.

NOTE: Time settings differ according to parameters of the chosen

command. If the parameters are changed, the User should try to

initiate a session using the default settings. If a Command Fail

message is received, the time should be increased. For details

regarding calculation of time setting, see paragraph 5.10.

System pause is the pause between sessions when the system is

in cyclic mode. This may also be set by the user.

Evaluation Software