User's Manual

3.9.5.
> setup time
Selecting the SETUP TIME function is displayed
on the screen as follows:
To change the time, enter digits in HH/MM format.
Press ENTER to set the new time.
3
By default, seal time zone settings are set to
GMT (Greenwich Mean Time). If the User is
located in a different time zone, an offset based
on the time difference must be entered into the
system. For example, the difference in Great
Britain(GMT) is 0, in Egypt +2 and on the East
Coast of the United States -5. When entering the
offset time during the summer months, daylight
saving time should be included in the calculation.
3.9.6.
> setup zone
setup time
current time: 14:27.
enter new time:
: .
Selecting the SETUP ZONE function brings the
following on the screen:
Use the up/down scrolling arrows to set the
desired offset. Press ENTER to set the offset.
set time zone
offset hr.:
+00
Hi-G-Tek Ltd. Microelectronics & Asset Tracking Technology
40
DataTerminal - Operating Instructions