User's Manual

2
DataSeal Installation
16
Hi-G-Tek Ltd. Microelectronics & Asset Tracking Technology
step 1.
Fig. 1
Fig. 3
To install the DataSeal Mounting Fixture, attach
the fixture to the keeper bar at the back of the
container (fig.1). A
click indicates that
the
fixture is in place.
The two side slots may be used to secure the
mounting fixture to the container using a plastic
strap(fig.2)
Fig. 2
0
To install the DataSeal, hold the unit at a 45
angle as illustrated and snap it into place in its
cradle on the DataSeal Mounting Fixture. (fig. 3)
step 2.
2.1 DataSeal Installation