User's Manual

3.2 SET Command
• Approach the Data Seal / Tag as to a distance of 3-8cm and press the S button.
o In the event that the seal / Tag is properly secured, Green LED will turn
on and a corresponding “beep” will sound indicating the SET command
has been succeeded.
NOTE: In the event that the SET command failed, the Micro Reader will pause for
two seconds and the Red LED will turn on with a corresponding beep sound, make
sure that the seal /tag is properly closed and locked.
SET modes
Depending on the application, you can choose* to perform either "soft set" or normal
set:
• “SOFT SET”: Setting the seal without erasing the events logged in seal’s memory.
• "SET": Setting the seal and erasing the events logged in seal’s memory (refreshed start)
* This feature can be programmed in advance before use. For detailed information please contact Hi-G-Tek's
applications tech. support.