User's Manual

Hi-G-Tek Ltd. Microelectronics & Asset Tracking Technology Pg.2

Placing the DataTag on the vehicle

Note: The Installation instructions refer to the case when the DataReader

is installed VERTICALY.

There are two preferred orientations for

placing the DataTag on the vehicle:

Horizontal Orientation:

Place the tag on a flat surface that is

completely horizontal and press firmly

to create good contact between the DataTag

and the tagged object.

Vertical Orientation

Place the DataTag on a flat surface that

is completely vertical and press firmly to

create good contact between the DataTag

and the Tagged object.

It is recommended that the height of the

DataTag above ground will be above 3’

and the optimal height is 5’ above ground.