User's Manual

Initial System Setup
Defining the Truck Configuration
Tanker Truck Monitoring System- User’s Guide 26
2.6.2 Verifying the Seal Status Indicators Operability
The Seal Status Indicators tab is used to view and test the operability of the Seal Status
Indicators. It contains buttons for testing the Seal Status Indicator LEDs by setting them to
Green, Red, Off, etc. and shows the status of each LED.
To verify and test Seal Status Indicator operability
1. In the AVL Configuration window, click the Seal Status Indicators tab. The following
window appears.
Figure 2-6. Seal Status Indicators Tab
The tab is divided into two areas, one for each Seal Status Indicator. Each area contains
LEDs that mirror the status of the corresponding Seal Status Indicator LEDs, and buttons for
testing the Seal Status Indicator LED responses.
LED Color Indications:
• Green – seal closed
• Red – seal open
• Off – seal not enabled
2. Begin by verifying that the display is operational for each Seal Status Indicator:
• Click All Green and Apply. All the corresponding LEDs should be Green.
• Click All Red and Apply. All the corresponding LEDs should be Red.
3. You toggle individual LEDs between Red, Green and flickering by repeatedly clicking on the
checkbox of the seal representation.
Seal Status
Indicators tab
Command buttons