User's Manual

Initial System Setup
Preliminary Setup
Tanker Truck Monitoring System- User’s Guide 16
2.2 Preliminary Setup
The Setup procedure includes the following steps:
1. Grouping the system elements and performing the required interconnections.
2. Configure the seals using the Seal Config Application
3. Defining the Reader and authorized refineries
4. Configuring application parameters
5. Verifying that the LED Seal Status Indicators are operational
6. Interrogating the seals and verifying response
7. Configuring the Readers’ site coordinates
The steps above complete the installation procedure.
2.3 Grouping and Connecting the System Elements
Physically group the seals, TTMS Reader elements and LED Seal Status comprising a specific site
installation. Interconnect the TTMS Reader Elements and the LED Seal Status according to the
following figure.