Product Manual

5. Data Copy

5.1 Point Cloud Data Copy

1. Power on the HD TLS360 host;

2. Use a network cable to connect the LAN port of the HD TLS360 host

to the computer network port. Set the IP address of the computer network port

by according to the steps described in Section 4.3.2.

3. Open “my computer” (computer) and type "\\192.168.0.196" in the

address box, as shown in Figure 5-1:

Figure 5-1 Data Copy

4. Enter the user name and password in the pop-up dialog box. The

default user name and password for data copy is "root". After entering the

system, the data is saved in the SD_Card/SD Card or SSD/DATA(Solid State

Disk) folder according to the operation during the scanning. The data in the

folder is the original data collected by the device.

Reminder:

You need to input the user name and password when you connect

the computer to the device for the first time. And you do not need

the user name and password when you connect again.

5.2 Image Data Copy

The image copy is directly downloaded to the mobile phone through the

Insta360 ONE X camera mobile phone APP. Please refer to the Insta360 ONE

X operation manual or follow the instructions of our technicians.