Product Manual

Notice:

HD TLS360 equipment needs to be held by hand during

disassembly to avoid accidental falling of the equipment after

loosening the fixing nut.

4. Equipment Operation

4.1 Equipment Startup

1. After the equipment installation is completed according to the steps

described in Section 3.2, the HD TLS360 system equipment can be used;

2. According to the steps described in Section 2.2.1, turn on the battery,

wait for two seconds, and then press the power button of the HD TLS360. The

indicator light is on and the equipment is started;

3. When the indicator light is on, you can use your mobile phone or

computer to search for WiFi hotspots. When the WiFi access point named "HD

TLS360" is searched, the system will start normally.

Notice:

Since it takes time (usually less than 1min) to initialize after the

equipment is started, please wait patiently during the equipment

system initialization.

4.2 Camera Operation

The model of HD TLS360 system camera is Insta360 ONE X. Please

refer to the Insta360 ONE X operation manual or follow the instructions of our

technicians.

4.3 Host Connection

HD TLS360 system provides two connection modes: wireless connection

and wired connection. The two connection modes are described below.