Product Manual

11
3.2.2 Battery Disassembly
Ensure that the HD TLS360 system host is turned off and turn off the
battery power. Press the clips on both sides of the battery and pull the battery
out of the battery compartment in the direction of the arrow.
Figure 3-2.2 Battery Disassembly
3.2.3 Camera Installation
Ensure that the HD TLS360 system host is turned off. Install the camera
component into the top of the host in the direction shown in the figure, and
tighten the screws on both sides by hand.
Figure 3-2.3 Installation diagram of HD TLS360 system camera