User's Manual

ManualsBrandsHHC Changzhou ManualsElectronicsControl Box

1/3



CB18BControlBoxInstructions

1.ProductOverview

ProductName：ControlBox

ProductModelNo.：CB18B

FCCID:2AEQWCB18HHC008



2.Environmentrequirement

Operationtemperature:+10℃~+40℃.

Storagetemperat ure: －10℃~65℃.

OperatingHumidity：10%~80%RH，non‐condensing.

StorageHumidity：10%~85%RH，non ‐condensing.



3.DirectionsforOperation

To use the control box, the

 switch power supply must be connected as the control box power

supply.TheCH10remotecontrolmustalsobepairedtobeused.Detailedusageforeachportis

asfollows:

3.1Beforeuse,theCH10remotecontrolandCB18Bcontrolboxmustbepaired:



3.2Then, turn on the con tr ol box's Power, and after the beep sound the system will work.

Followtheexamplebelowtoproperlyplugpartsin.



Summary of content (3 pages)

PAGE 1
CB18B Control Box Instructions 1. Product Overview Product Name： Control Box Product Model No.： CB18B FCC ID: 2AEQWCB18HHC008 2. Environment requirement Operation temperature: +10℃~ +40℃. Storage temperature: －10℃~65℃. Operating Humidity：10%~80%RH，non‐condensing. Storage Humidity：10%~ 85%RH，non‐condensing. 3. Directions for Operation To use the control box, the switch power supply must be connected as the control box power supply. The CH10 remote control must also be paired to be used.
PAGE 2
SYNC Cord Connection Head Motor Port APP Port Foot Motor Port LED Connection Tilt Motor Port USB Connection Power Input connection Head Massage Motor Port Foot Massage Motor Port 4. The port is introduced 4.1 “HD Motor”：Connects to the Head motor, and lifts/lowers head section. 4.2 “FT Motor”：Connects to the Foot motor, and lifts/lowers foot section. 4.3 “Tilt Motor”：Connects to the Tilt motor, and adjusts tilt. 4.4 “Power”：Connects to the power supply box, controls power supply. 4.
PAGE 3
6. Additional attention for user： 6.1 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.