User Manual

204 mm
145 mm
10mm
155 mm
156 mm
180mm
SPECIFICATION - TNi-C4
For polar plots, EASE modelling files, 2D and 3D drawings files, please check www.hhelectronics.com
3 Calculated maximum SPL based on rated power handling
1 AES standard Pink Noise 12dB crest factor 2 hours.
4 Average coverage between 500Hz - 4KHz
2 Measured in Full space (4π) conditions
MINIMUM REQUIRED
INSTALLATION DEPTH
5
REQUIRED CUTOUT
CEILING INSTALLATION LOUDSPEAKER
Model
TNi-C4
Woofer Size
4 inch
Woofer Cone Material
Paper
Tweeter Size
1.5 inch Neodymium
100V Transformer Power Taps
30W, 15W, 6W
70V Transformer Power Taps
15W, 7.5W, 3W
Low Impedance
8 ohm
System Power Rating
1
45W AES, 180W Peak
Recommended Amplifier
80-160W @ 8 Ohms
Sensitivity 1W/1m
2
88 db SPL
Max SPL 1m
3
111 dB SPL
Frequency Response
85Hz - 20KHz (-10dB)
100Hz - 16KHz (-3dB)
Input Connector
Push Spring Connectors
Nominal Coverage
4
130° conical
Enclosure
Outside Diameter
204mm, (8")
Depth
156mm, (6.1")
Cutout
180mm, (7.1")
Installation Grip Range
4-20mm
Main Construction Material
ABS Plastic
Grille Main Material
1.5mm Circular Mesh Steel
Finish
White
Mounting Points
3x Dog Ear Brackets
Unit weight
1.4Kg, 3.1 lbs
Single Carton dimensions (HWD)
180 x 205 x 205mm, (7.1" x 8.1" x 8.1")
Single Packed weight
1.9Kg, 4.2 lbs
EAN Code
5060109457032
Master Carton dimensions (HWD)
400 x 450 x 450mm, (15.7" x 17.7" x 17.7") (8pcs)
Master Packed weight
16.2Kg, 35.7 lbs
Master EAN Code
5060109457049
In the interest of continued development, HH reserves the right to amend product specification without prior notification.
iNSTALL
Designed and Engineered in the UK by HH Electronics LTD.
© 2021 HH Electronics Ltd