User Manual



Designed and Engineered in the UK by HH Electronics LTD.

LINE ARRAY

ARRAY

SAFETY

In the interest of continued development, HH reserves the right to amend product specification without prior notification.

cabinets.

Depending on local regulations, additional pull back supports may be required.

For added safety, it is strongly recommended that the audio connections, mechanical fixings and mounting

brackets are checked periodically.

It is the installers responsibility to ensure the point of fixing is structurally adequate to support the weight of the

Under no circumstances attempt to rig, suspend or otherwise mount this system unless you are fully qualified

and certified to do so by relevant local, state and national authorities. All relevant safety regulations must be

followed. If you are not properly qualified or do not know of pertinent regulations, consult qualified personnel for

advice and assistance.

The flying of cabinets should be performed only by properly qualified persons, in compliance with all local laws

and using approved hardware.

The rigging or suspended mounting of these speakers can expose members of the public to serious health risks

or even death.

TWO TNA-1200S

UPTO EIGHT TNA-2051*

SPECIFICATION

TNA-BRK1 MAXIMUM SUPPORT LIMIT

*extra pull-back support required for more than 4 TNA-2051

Model

TNA-BRK1

Suspension Type

The bracket allows you to fit upto three D-shackles (included)

Mounting Type

Five M8 mounting points hold the bracket securely to the cabinet

Max Load Weight

120Kg, 264lbs

Max Unit Load

8x TNA-2051 & 2x TNA-1200S OR 4x TNA-1200S

Unit dimensions (HWD)

64 x 451 x 340mm, 2.5" x 17.8" x 13.4"

Unit weight

5.6Kg, 12.3 lbs

Carton dimensions (HWD)

145 x 505 x 430mm, 5.7" x 19.9" x 16.9" , 0.031 M3

Packed weight

6.7Kg, 14.8 lbs