User Manual

Designed and Engineered in the UK by HH Electronics LTD.

17. BATTERY STATUS: The charge LED will illuminate when charging. Battery charge status is indicated by the four LEDs, charge

your Tensor-GO when the low level indicator is lit. For a reliable indication always check the status with the master volume turned

down or any inputs muted.

15. MAINS SWITCH: Turns the

system on and off. It is good practice to the Master Volume control minimum when switching on and offturn to . The internal battery

will charge even if the power switch is set to off.

16. 12V DC IN: It is possible to charge your Tensor-GO from an external 12V power source such as a lead acid car battery or

lithium-ion power pack.

14. MAINS INLET SOCKET: IEC

input for connection of the included mains

lead. Tensor-GO contains a universal

mains input for worldwide usage without

the need to change anything except your

power cord.

When powered, the internal lithium

battery will be charged. The system can be

operated normally whilst charging.

MODEL: TENSOR-GO

POWER CONSUMPTION 300 WATTS

SUPPLY VOLTAGE 100-240V~

POWER

CAUTION - RISK OF ELECTRIC SHOCK DO NOT OPEN

ATTENTION - LE RISQUE DE DÉCHARGE ÉLECTRIQUE NE S'OUVRENT PAS

12V DC IN

CHARGE 25% 50% 100%LOW

BATTERY STATUS