User Manual

Designed and Engineered in the UK by HH Electronics LTD.

SETUP

A. Tensor-GO Subwoofer and amplifier

B. Two identical spacer pillars

C. Column Loudspeaker

Position the subwoofer on a stable surface in the desired location, then proceed to fit the

spacer columns by firmly pressing into position. Finally insert the column loudspeaker, ensuring

all joints are firmly pushed into position.

Tensor-Go may be used with either one or two spacer units depending on the unit’s position

and your chosen usage. For floor mounted operation, two spacers are recommended.

Care must be taken to position the unit to avoid causing a hazard, and ensuring it cannot be

knocked over. If in doubt the unit should be secured in place.