Datasheet
Travelstar 80GN Hard Disk Drive Specification
181
13.43 Write DMA EXT (35h)
Table 126: Write DMA (35h)
The Write DMA Ext command transfers one or more sectors of data from the host to the device, then the data is
written to the disk media.
The sectors of data are transferred through the Data Register 16 bits at a time.
The host initializes a slave-DMA channel prior to issuing the command. Data transfers are qualified by DMARQ
and are performed by the slave-DMA channel. The device issues only one interrupt per command to indicate that
data transfer has terminated and status is available.
If an uncorrectable error occurs, the write will be terminated at the failing sector.
Output parameters to the device
Sector Count Current The number of continuous sectors to be transferred low order, bits (7-0).
Sector Count Previous The number of continuous sectors to be transferred high order bits (15:8). If zero is speci-
fied in the Sector Count register, then 65,536 sectors will be transferred.
LBA Low Current LBA (7-0)
LBA Low Previous LBA (31-24)
LBA Mid Current LBA (15-8)
LBA Mid Previous LBA (39-32)
Command Block Output Registers Command Block Input Registers
Register 7 6 5 4 3 2 1 0 Register 7 6 5 4 3 2 1 0
Data Low - - - - - - - - Data Low - - - - - - - -
Data High - - - - - - - - Data High - - - - - - - -
Feature
Current - - - - - - - - Error see below
Previous - - - - - - - -
Sector
Count
Current V V V V V V V V
Sector
Count
HOB=0 - - - - - - - -
Previous V V V V V V V V HOB=1 - - - - - - - -
LBA Low
Current V V V V V V V V
LBA Low
HOB=0 V V V V V V V V
Previous V V V V V V V V HOB=1 V V V V V V V V
LBA Mid
Current V V V V V V V V
LBA Mid
HOB=0 V V V V V V V V
Previous V V V V V V V V HOB=1 V V V V V V V V
LBA High
Current V V V V V V V V
LBA High
HOB=0 V V V V V V V V
Previous V V V V V V V V HOB=1 V V V V V V V V
Device - 1 - D - - - - Device V - - - - - - -
Command 0 0 1 1 0 1 0 1 Status See below ...
Error Register Status Register
7654321 0 76543 21 0
CRC UNC 0 IDN 0 ABT T0N AMN BSY RDY DF DSC DRQ COR IDX ERR
V00V0V0 0 0V0V- 0- V










