Datasheet

Travelstar 80GN Hard Disk Drive Specification
114
Table 75: Identify device information. (Part 4 of 7)
* indicates the use of those parameters that are vendor specific.
** indicates a feature that is able to be unsupported by the Device Configuration Overlay command.
Word Content Description
83 7FE8H
*
Command set supported
15(=0) Always
14(=1) Always
13(=1) 1=FLUSH CACEH EXT command supported
12(=1) 1=FLUSH CACHE command supported
11(=1) 1=Device Configuration Overlay command supported
10(=1) 1=48-bit Address feature set supported
9(=1) 1=Automatic Acoustic Management supported
** 8(=1) 1=SET MAX security extension supported
** 7(=1) 1=Address Offset feature supported
6(=1) 1=SET FEATURES subcommand required to spin-up
5(=1) 1=Power-Up In Standby feature set supported
4(=0) 1=Removable Media Status Notification Feature Set
supported
3(=1) 1=Advanced Power Management Feature Set supported
2(=0) 1=CFA Feature Set supported
1(=0) 1=READ/WRITE DMA QUEUED supported
0(=0) 1=DOWNLOAD MICROCODE command supported
84 4023H Command set/feature supported extension
15(=0) Always
14(=1) Always
13- 6(=0) Reserved
5(=1) 1=General Purpose Logging feature set supported
4-2(=0) Reserved
** 1(=1) 1=SMART self-test supported
** 0(=1) 1=SMART error logging supported
85 F4XXH
Command set/feature enabled
15(=1) Reserved
14(=1) 1=NOP command supported
13(=1) 1=READ BUFFER command supported
12(=1) 1=WRITE BUFFER command supported
11(=0) Reserved
**10(=1) 1=Host Protected Area Feature Set supported
9(=0) 1=DEVICE RESET command supported
8(=0) 1=SERVICE interrupt enabled
7(=0) 1=release interrupt enabled
6(=X) 1=look-ahead enabled
5(=X) 1=write cache enabled
4(=0) 1=supports PACKET Command Feature Set
3(=X) 1=supports Power Management Feature Set
2(=0) 1=supports Removable Media Feature Set
1(=X) 1=Security Feature Set enabled
0(=X) 1=S.M.A.R.T. Feature Set enabled