Datasheet

YyYYY-3ChWrite Verify3

YYYYY-38h

Write Sector(s) w/o

Erase

YYYYY-30h or 31hWrite Sector(s)2

YYYYY-CDh

Write Multiple w/o

erase

YYYYY-C5hWrite Multiple3

YYYY--32h or 33hWrite Long Sector2

YYYYY-CAh or CBhWrite DMA2

-D----E8hWrite Buffer2

-Y----F5hWear Level1

YYYYY-87hTranslate Sector1

-D----E0h or 94hStandby Immediate1

-D----E2h or 96hStandby1

LBADHCYSNSCFRCodeCOMMANDClass

Figure 69. CF-ATA Command Description (part 2 of 2

Definitions

FR = Features Register

SC = Sector Count Register

SN = Sector Number Register

CY = Cylinder Registers

DH = Card/Device/Head Register

LBA = Logical Block Address Mode Supported (see Section command descriptions for use)

Y - The register contains a valid parameter for this command. For the Device/Head Register Y

means both the Card and head parameters are used

D - only the Card parameter is valid; the head parameter is not.

Hard disk drive specification for DSCM-11000/-10512/-10340