Datasheet

error. The errored location will be reported with CHS mode or LBA mode, the mode is decided by mode

select bit (bit 6) of Device/Head register on issuing the command.

If an Uncorrectable Data Error (UNC=1) occurs, the defective data will be transferred from the media to

the sector buffer, and will be available to be transferred to the host, at the host's option. In case of Read

Multiple command, the host should complete transfer the block which includes the error from the sector

buffer and terminate whatever kind of type of error occurred.

All data transfers to the host through the Data Register are 16 bits with the exception of the ECC bytes,

which are 8 bits.

Hard disk drive specification for DSCM-11000/-10512/-10340