Manualshelf

Datasheet

ManualsBrandsHGST ManualsExternal Hard Drives07N5610
61626364656667686970
10.0 Deviations from Standard
WRITE VERIFY command does not include read verification after write operation.
The function is exactly same as WRITE SECTORS command.
Write Verify
Standby timer is enabled by STANDBY command or IDLE command. The value in
the Sector Count register shall be used to determine the time programmed into the
Standby timer. If the Sector Count register is zero, then the Standby timer is set to
109 minutes automatically.
Standby Timer
Hard disk drive specification for DSCM-11000/-10512/-10340
49