Datasheet

8.10 I/O Output (Write) timing
Detailed timing specifications are shown in the following two figures.
350Wait Width Timetw(WT)
0IOWR high from Wait hightdr IOWR(WT)
35Wait Deay Falling from IOWRtdfWT(IOWR)
35IOIS16 Delay rising from Addresstdr IOIS16 (ADR)
35IOIS16 Delay Falling from Addresstdf IOIS16 (ADR)
0REG Hold following IOWRthREG (IOWR)
5REG Setup before IOWRtsuREG(IOWR)
20CE Hold following IOWRthCE(IOWR)
5CE Setup before IOWRtsuCE(IOWR)
20Address Hold following IOWRthA(IOWR)
70Address Setup before IOWRtsuA(IOWR)
165IOWR width Timetw(IOWR)
30Data Hold following IOWRth(IOWR)
60Data Setup before IOWRtd(IOWR)
Maximum
(ns)
Minimum
(ns)
ItemSymbol
Figure 29. I/O Output (Write) timing data
Note: The maximum load on -WAIT, -INPACK, and -IOIS16 is 1LST TL with a 50 pF total load.
A[10::0]
REG#
CE#
IORD#
INPACK#
IOIS16#
WAIT#
D[15::0]
tsuREG(IORD)
tsuCE(IORD)
tsuCE(IORD)
tdfIOIS16(ADR)
tdfINPACK(IORD)
td(IORD)
tdr(WT)
tw(WT)
tdfWT(IORD)
th(IORD)
tdrIOIS16(ADR)
tdrINPACK(ADR)
tw(IORD)
th
CE(IORD)
th
A(IORD)
th
REG(IORD)
Figure 30. I/O Output (Write) timing diagram
Hard disk drive specification for DSCM-11000/-10512/-10340
39