Datasheet

8.9 I/O Input (Read) timing
Detailed timing specifications are shown in the following two figures.
350Wait Width Timetw (WT)
0Data Delay from Wait Risingtdr (WT)
35Wait Deay Falling from IORDtdf WT (IIORD)
35IOIS16 Delay Rising from Addresstdr iois16 (ADR)
35IOIS16 Delay Falling from Addresstdf IOIS16 (ADR)
45INPACK Delay Rising from IORDtdr INPACK (IORD)
45
INPACK Delay Falling from IORDtdf INPACK (IORD)
0REG Hold following IORDth REG (IORD)
5REG Setup before IORDtsu REG (IORD)
20CE Hold following IORDth CE (IORD)
5CE Setup before IORDtsu CE (IORD)
20Address Hold following IORDth A (IORD)
70Address Setup before IORDtsu A (IORD)
165IORD width Timetw (IORD)
0Data Hold following IORDth (IORD)
tw
Data Delay after IORDtd (IORD)
Maximum
(ns)
Minimum
(ns)
ItemSymbol
Figure 27. I/O Input (Read) timing data
A[10::0]
REG#
CE#
IORD#
INPACK#
IOIS16#
WAIT#
D[15::0]
tsuREG(IORD)
tsuCE(IORD)
tsuCE(IORD)
tdfIOIS16(ADR)
tdfINPACK(IORD)
td(IORD)
tdr(WT)
tw(WT)
tdfWT(IORD)
th(IORD)
tdrIOIS16(ADR)
tdrINPACK(ADR)
tw(IORD)
th
CE(IORD)
th
A(IORD)
th
REG(IORD)
Figure 28. I/O Input (Read) timing diagram
Hard disk drive specification for DSCM-11000/-10512/-10340
38