Datasheet

y No manufacturing processes for parts or assemblies—including printed circuit boards—use

controlled CFC materials.

7.10.8 Secondary circuit protection

This product utilizes printed circuit wiring that must be protected against the possibility of sustained

combustion due to circuit or component failures as defined in C-B 2-4700-034 (Protection Against

Combustion). Adequate secondary over-current protection is the responsibility of the using system.

The user protects the DRIVE from its electrical short circuit problem. A 0.5-Amp limit is required for safety

purposes.

7.11 Packaging

Drives are shipped in appropriate containers and placed on pallets in accordance with Hitachi Supplier

Packaging Instruction (Hitachi specification GA-21-9261-8).

Drives procured under this specification are assembled and tested using "Electrostatic Discharge

Protection" process and precedure—Hitachi document number EN/14/0116. A protection system suitable

for the fixed disk drive must be installed and monitored by the appropriate ME/QA function. The goal is to

prevent electrostatic potential from accumulating on any object which may deliberately or inadvertently be

brought into contact with the drive.

Drives are shipped in ESD protective bags as defined in the Hitachi specification control drawing

(P/N 6937283).

Hard disk drive specification for DSCM-11000/-10512/-10340