Datasheet

7.8 Identification labels
The labels are affixed to every drive.
The top side of the label contains
y Model name
y Part number
y The statement "Made by IBM"
y Country of origin
y Notifications to the customer
y The marks of agencies approval
y Bar code of the serial numbers
The bottom side of the label contains
y The IBM logo
y The capacity
y The product name (Microdrive)
Due to space limitations, no additional requirements by customer are allowed.
7.9 Electromagnetic compatibility
The drive—when installed in a suitable enclosure and exercised with a random accessing routine at
maximum data rate—meets the following worldwide EMC requirements.
y United States Federal Communications Commission (FCC) Rules and Regulations (Class B), Part 15
y RFI Suppression German National Requirements: IBM National Bulletin NB 2-0001-40
y RFI Japan VCCI Requirements of IBM products: IBM National Bulletin NB 2-001-403
y UE EMC Directive Technical Requirements and Conformity Assessment Procedures:
NB 20-0001-038
y Electrostatic Discharge susceptibility limits for a class 2 ESD environment specified in IBM Corporate
Standard C-S 2-0001-005andic
y Radiated Electromagnetic Susceptibility (RES) as specified in IBM Corporate Standard
C-S 2-0001-012
IBM small LES development will provide technical support to assist users in complying with the EMC
requirements.
7.9.1 CE Mark
The product is certified for compliance with EC directive 89/336/EEC. The EC marking for the certification
appears on the drive.
7.9.2 C-Tick Mark
The product complies with the following Australian EMC standard—limits and methods of measurement
of radio disturbance characteristics of information technology equipment per document
AS/NZS 3548:1995 Class B,
Hard disk drive specification for DSCM-11000/-10512/-10340
30