Datasheet

13.5.33 Write Sector(s) without Erase (38h)
...See Below...StatusR0001100Command
HHHH----Device/HeadHHHHD1L1Device/Head
VVVVVVVVCylinder HighVVVVVVVVCylinder High
VVVVVVVVCylinder LowVVVVVVVVCylinder Low
VVVVVVVVSector NumberVVVVVVVVSector Number
VVVVVVVVSector CountVVVVVVVVSector Count
...See Below...Error--------Feature
--------Data--------Data
01234567Register01234567Register
Command Block Input RegistersCommand Block Output Registers
V00-VVV000V0V000
ERRIDXCORDRQDSCDFRDYBSYAMNT0NABT0IDN0UNCBBK
0123456701234567
Status RegisterError Register
Figure 111. Write Sector(s) without Erase Command (38h)
This command is identical to the Write Sector(s) command as the Hitachi Microdrive does not need pre-
erase before a write operation.
13.5.34 Write Verify (3Ch: Vendor Specific)
In DSCM-1xxxx implementation, the Write Verify command is exactly same as the Write Sectors
command (30h). No read verification is performed after write operation.
Refer to Write Sectors Command for parameters
.
Hard disk drive specification for DSCM-11000/-10512/-10340
134