Datasheet

13.5.25 Translate Sector (87h)
...See Below...StatusR0000100Command
HHHH----Device/HeadHHHHD1L1Device/Head
VVVVVVVVCylinder HighVVVVVVVVCylinder High
VVVVVVVVCylinder LowVVVVVVVVCylinder Low
VVVVVVVVSector NumberVVVVVVVVSector Number
--------Sector Count--------Sector Count
...See Below...Error--------Feature
--------Data--------Data
01234567Register01234567Register
Command Block Input RegistersCommand Block Output Registers
V00-V0V0V0V0V0V0
ERRIDXCORDRQDSCDFRDYBSYAMNT0NABT0IDN0UNCBBK
0123456701234567
Status RegisterError Register
Figure 102. Translate Sector command (87h)
This command allows the host a method of determining the exact number of times a user sector has
been erased and programmed. The controller responds with a 512-byte buffer of information containing
the desired cylinder, head and sector, including its Logical Address, and the Hot Count, if available, for
that sector.
he following table represents the information in the buffer. Please note that this command is unique to the
card.
Hard disk drive specification for DSCM-11000/-10512/-10340
121