Datasheet

13.5.9 Idle Immediate (E1h/95h)
...See Below...Status10000111Command
--------Device/Head----D1-1Device/Head
--------Cylinder High--------Cylinder High
--------Cylinder Low--------Cylinder Low
--------Sector Number--------Sector Number
--------Sector Count--------Sector Count
...See Below...Error--------Feature
--------Data--------Data
01234567Register01234567Register
Command Block Input RegistersCommand Block Output Registers
V00-V0V000V00000
ERRIDXCORDRQDSCDFRDYBSYAMNT0NABT0IDN0UNCBBK
0123456701234567
Status RegisterError Register
Figure 84. Idle Immediate Command (E1h/95h)
The Idle Immediate command causes the device to enter Idle mode.
The device is spun up to operating speed. If the device is already spinning, the spin up sequence is not
executed.
During Idle mode the device is spinning and ready to respond to host commands immediately.
The Idle Immediate command will not affect the auto power down timeout parameter.
Hard disk drive specification for DSCM-11000/-10512/-10340
100