Datasheet

Bit 6 of word 85 is set to one, if the look-ahead has been enabled.
Bit 7 of word 85 is set to one, if the write cache has been enabled.
Bit 12 of word 85 is set to one, if the Write Buffer command has been enabled.
Bit 13 of word 85 is set to one, if the Read Buffer command has been enabled.
Bit 14 of word 85 is set to one, if the NOP command has been enabled.
Bit 2 of word 86 is set to one, if the CFA feature set has been enabled.
Bit 3 of word 86 is set to one, if the Advanced Power Management feature set has been enabled via
the Set Features command.
Current Advanced Power Management Level
This field contains Current Value of Advanced Power Management Level.
Current Set Features Option, Bit Assignment
This field contains Current Option Value of Set Features.
Reassigned Sectors
This field contains the number of reassigned sectors.
Initial Power mode Selection, Bit Assignment
This field contains the mode definition at power on reset.
User Signature
This field contains user signature.
Power Requirement Description
This word is required for CompactFlash Storage Cards that support power mode 1.
Bit 15: VLD
if set to 1, indicates that this word contains a valid power requirement description.
if set to 0, indicates that this word does not contain a power requirement description.
Bit 14: RSV
This bit is reserved and must be 0.
Bit 13: -XP
if set to 1, indicates that the Card does not have Power Level 1 commands.
if set to 0, indicates that the Card has Power Level 1 commands
Bit 12: -XE
if set to 1, indicates that Power Level 1 commands are disabled..
if set to 0, indicates that Power Level 1 commands are enabled.
Bit 0-11: Maximum current
This field contains the Card’s maximum current in mA.
CF Command Set Extentions
This word is assigned to have capability of CF command set extentions.
Bit 0:
If set to 1, indicates that Metadata command set is supported.
If set to 0, indicates that Metadata command set is not supported.
Bit 15:
If set to 1, Word 161 is valid.
If set to 0, Word 161 is not valid.
Hard disk drive specification for DSCM-11000/-10512/-10340
98