Datasheet

13.5.7 Identify Device (ECh)
...See Below...Status00110111Command
--------Device/Head----D1-1Device/Head
--------Cylinder High--------Cylinder High
--------Cylinder Low--------Cylinder Low
--------Sector Number--------Sector Number
--------Sector Count--------Sector Count
...See Below...Error--------Feature
--------Data--------Data
01234567Register01234567Register
Command Block Input RegistersCommand Block Output Registers
V00--0V000V00000
ERRIDXCORDRQDSCDFRDYBSYAMNT0NABT0IDN0UNCBBK
0123456701234567
Status RegisterError Register
Figure 81. Identify Device Command (ECh)
The Identify Device command requests the device to transfer configuration information to the host. The
device will transfer a sector to the host containing the information in Figure 82 on page 97.
Hard disk drive specification for DSCM-11000/-10512/-10340
94