Datasheet

13.5.4 Erase Sectors (C0h)
...See Below...Status00000011Command
HHHH----Device/HeadHHHHD1L1Device/Head
VVVVVVVVCylinder HighVVVVVVVVCylinder High
VVVVVVVVCylinder LowVVVVVVVVCylinder Low
VVVVVVVVSector NumberVVVVVVVVSector Number
VVVVVVVVSector CountVVVVVVVVSector Count
...See Below...Error--------Feature
--------Data--------Data
01234567Register01234567Register
Command Block Input RegistersCommand Block Output Registers
V00-V0V0V0V0V0V0
ERRIDXCORDRQDSCDFRDYBSYAMNT0NABT0IDN0UNCBBK
0123456701234567
Status RegisterError Register
Figure 77. Erase Sectors Command (C0h)
This command is implemented as a nop command with access range validation as the Hitachi Microdrive
does not need pre-erase in advance of a write operation.
Hard disk drive specification for DSCM-11000/-10512/-10340
90