Operating Instructions

FINAL INSTALLATION
12. Remove all three switch housing screws (V) from the
switch housing cap (I). Align the notch in the switch
housing cap (I) with the reverse switch located on
switch housing (H), then re-install all three switch
housing screws (V).
12
H
V
I
Notch
13. OPTIONAL: If you wish to install the wall bracket
from remote pack (P), choose desired location and
insert screws from remote pack (P) into holes of wall
bracket and into installation site. Store the remote
from remote pack (P) on the wall bracket by placing
the slot on the back of the remote onto the wall
bracket.
13
Screw
Wall Bracket
Slot
Wall
Bracket
14. Turn on the circuit breakers and the wall switch to the
fan supply line leads.
Assembly is complete.
14
17