Operating Instructions

FINAL INSTALLATION
Note: Closemount installation will not have the downrod (A) or canopy cover (F). Downrod (A)
is shown/referenced, but instructions are applicable to both standard and closemount-style
installations.
hooks of the mounting bracket (E). Wrap the wire
harness coming from the downrod (A) around the
wire hooks.
Important: Ensure the wire harness is supported
by the wire support to prevent damage to the wire
harness during canopy installation.
Harness
A
Wire
Support
2.
Connect the wire harness from the downrod (A) to the
wire harness from the receiver from remote pack (P).
2
Wire Harness
A
13
1. Read and discard the paper tag attached to the wire
1 E
Note: Extra wire harness length accommodates
Wire Wire Hook
longer downrods.