Operating Instructions

STANDARD OR ANGLE MOUNTING INSTRUCTIONS
4.
Install the ball end of the downrod (A) into the opening
of
the mounting bracket (E). Rotate the fan in the mounting
bracket (E) until a slot in the ball end of the downrod (A)
engages the tab in the mounting bracket (E).
DANGER: The fan and/or downrod (A) should
not rotate in the mounting bracket (E) if installed
correctly. Failure to align the slot with the tab may
result in fan falling causing serious injury or death.
4
A
E
Slot
E
A
5.
Insert the receiver from remote pack (P) into the
facing the ceiling.
WARNING: Using a full-range dimmer switch to
control fan will cause a loud humming noise from the
or electric shock, do NOT use a full-range dimmer
switch to control the fan speed.
5
E
Tab
Receiver
Proceed to WIRING on page 12.
10