Q.PEAK DUO-G5 320 Specifications

UL 1703; VDE Quality Tested; CE-compliant;
IEC 61215 (Ed.2); IEC 61730 (Ed.1) application class A
Specications subject to technical changes © Hanwha Q CELLS Q.PEAK DUO-G5_305-330_2017-09_Rev01_NA
At least 98 % of nominal power during rst year.
Thereafter max. 0.54 % degradation per year.
At least 93.1 % of nominal power up to 10years.
At least 85 % of nominal power up to 25years.
All data within measurement tolerances.
Full warranties in accordance with the warranty
terms of the Q CELLS sales organization of your
respective country.
Typical module performance under low irradiance conditions in
comparison to STC conditions (25 °C, 1000 W/m
2
).
Hanwha Q CELLS America Inc.
300 Spectrum Center Drive, Suite 1250, Irvine, CA 92618, USA | TEL +1 949 748 59 96 | EMAIL inquiry@us.q-cells.com | WEB www.q-cells.us
MECHANICAL SPECIFICATION
Q CELLS PERFORMANCE WARRANTY PERFORMANCE AT LOW IRRADIANCE
IRRADIANCE [W/m²]
RELATIVE EFFICIENCY [%]
200 400 600 800 1000
110
100
90
80
Irradiance [W/m²]
Relative efficiency [%]
Format 66.3 in × 39.4 in × 1.26 in (including frame)
(1685 mm × 1000 mm × 32 mm)
Weight 41.2 lbs (18.7 kg)
Front Cover 0.13 in (3.2 mm) thermally pre-stressed glass with anti-reflection technology
Back Cover Composite film
Frame Black anodized aluminum
Cell 6 × 20 monocrystalline Q.ANTUM solar half-cells
Junction box
2.76-3.35 in × 1.97-2.76 in × 0.51-0.83 in
(70-85 mm × 50-70 mm × 13-21 mm), decentralized, IP67
Cable 4 mm² Solar cable; (+) ≥ 43.3 in (1100 mm), (−) ≥ 43.3 in (1100 mm)
Connector Multi-Contact MC4, IP65 and IP68
PROPERTIES FOR SYSTEM DESIGN
Maximum System Voltage V
SYS
[V]
1000 (IEC) / 1000 (UL)
Safety Class II
Maximum Series Fuse Rating [A DC] 20 Fire Rating
C
(IEC) / TYPE 1 (UL)
Design load, push (UL)
2
[lbs/ft
2
] 75 (3600 Pa) Permitted module temperature
on continuous duty
40 °F up to +185 °F
(− 40 °C up to +85 °C)
Design load, pull (UL)
2
[lbs/ft
2
] 55.6 (2666 Pa)
2
see installation manual
NOTE: Installation instructions must be followed. See the installation and operating manual or contact our technical service department for further information on approved installation and use
of this product.
EN
RELATIVE EFFICIENCY
COMPARED TO NOMINAL POWER [%]
100
95
90
85
80
75
155 25200 10
YEARS
98
Q CELLS
Industry standard for tiered warranties
*
Industry standard for linear warranties
*
*
Standard terms of guarantee for the 10 PV companies
with the highest production capacity in 2014 (as at: September 2014)
DE
DETAIL A
16mm
8.5mm
24.5mm
980mm
1685mm
4 × Befestigungspunkte (DETAIL A)
Rahmen
1000mm
951mm
32mm
8 × Entwässerungslöcher
352.5mm
ELECTRICAL CHARACTERISTICS
POWER CLASS 305 310 315 320 325 330
MINIMUM PERFORMANCE AT STANDARD TEST CONDITIONS, STC
1
(POWER TOLERANCE +5 W / −0 W)
Minimum
Power at MPP
2
P
MPP
[W] 305 310 315 320 325 330
Short Circuit Current* I
SC
[A] 9.93 9.98 10.04 10.09 10.14 10.20
Open Circuit Voltage* V
OC
[V] 39.35 39.61 39.87 40.13 40.40 40.66
Current at MPP* I
MPP
[A] 9.44 9.50 9.55 9.60 9.66 9.71
Voltage at MPP* V
MPP
[V] 32.30 32.64 32.98 33.32 33.65 33.98
Efficiency
2
η
[%] ≥18.1 ≥18.4
≥ 18.7 ≥ 19.0 ≥ 19.3 ≥ 19.6
MINIMUM PERFORMANCE AT NORMAL OPERATING CONDITIONS, NOC
3
Minimum
Power at MPP
2
P
MPP
[W] 226.0 229.7 233.4 237.2 240.9 244.6
Short Circuit Current* I
SC
[A] 8.00 8.05 8.09 8.14 8.18 8.22
Open Circuit Voltage* V
OC
[V] 36.80 37.05 37.30 37.54 37.79 38.04
Current at MPP* I
MPP
[A] 7.43 7.47 7.51 7.56 7.60 7.64
Voltage at MPP* V
MPP
[V] 30.43 30.75 31.07 31.39 31.70 32.01
1
1000 W/m², 25 °C, spectrum AM 1.5 G
2
Measurement tolerances STC ± 3 %; NOC ± 5 %
3
800 W/m², NOCT, spectrum AM 1.5 G * typical values, actual values may differ
Certified
UL 1703
(254141)
TEMPERATURE COEFFICIENTS
Temperature Coefficient of I
SC
α
[% / K] + 0.04 Temperature Coefficient of V
OC
β
[% / K] − 0.28
Temperature Coefficient of P
MPP
γ
[% / K] − 0.37 Normal Operating Cell Temperature NOCT [°F] 113 ± 5.4 (45 ± 3 °C)
QUALIFICATIONS AND CERTIFICATES
PACKAGING INFORMATION
Number of Modules per Pallet 32
Number of Pallets per 53' Trailer 30
Number of Pallets per 40' High Cube Container 26
Pallet Dimensions (L × W × H) 69.3
in × 45.3 in × 46.9 in
(1760 mm × 1150 mm × 1190 mm)
Pallet Weight 1415 lbs (642 kg)