Installation Guide

SAFEmine Ltd | www.safe-mine.com | [e-mail] 15/39
SAFEmine (part of Hexagon Mining)
Baarerstrasse 133, CH-6300 Zug
Switzerland
www.hexagon.com
3.4.3. QL460 DriverID Reader
The QL460 DriverID Reader enables the CAS system to verify the authorization of the operator
through contactless RF-ID cards. The installation of QL460 DriverID Reader requires a QS430
SerialExtender.
For in-depth information on SAFEmine DriverID configuration and the installation of QL460 keycard -
reader please consult with your support responsible or contact [e-mail].
Please refer to the Key-Control Application Note for further information.
3.4.4. QS430 SerialExtender
The QS430 SerialExtender adds 3 additional ports serial ports to the CAS unit. Several serial devices
such as QD200 RemoteDisplay, QD204 ScopeScreen, QL460 DriverID or a QS400 SafetyCenter
can be connected to this extension.
The QS430 SerialExtender does not need configuration for the QD200 remote display to work but it
is recommended to consult the documentation on dataport and port_dataport configuration
parameters.
For in-depth information on SAFEmine Serial Extender configuration and the installation of QS430
please consult with your support responsible or contact [e-mail].
Please refer to the SerialExtender Application Note for further information.
3.4.5. QR310 TrackingRadar
QR310 TrackingRadar is a complete subsystem which enables the CAS system to become sensible
to bigger obstacles and ground personnel in the close surroundings of the vehicle.
Please refer to the SAFEmine TrackingRadar Installation Manual for further information and ask your
support responsible for guidance. You may also choose to write to [e-mail] for
further assistance.