Installation Guide

SAFEmine Ltd | www.safe-mine.com | [e-mail] 14/39
SAFEmine (part of Hexagon Mining)
Baarerstrasse 133, CH-6300 Zug
Switzerland
www.hexagon.com
3.4. Accessories
3.4.1. Overview
Several accessories are available to extend the SAFEmine CAS system functionality. All
accessories, with exception of the QR310 TrackingRadars, can be easily installed on existing basic
SAFEmine CAS Systems and extended further when needed. As regarding the TrackingRadars,
specific training of your technical staff is required.
All accessories require FW upgrades for activation. The QL015 Loudspeaker requires additional SW
to be installed (voice file).
If you consider upgrading your CAS system with any of our accessories, please contact your local
SAFEmine support responsible for further guidance.
For the different accessories available, please consult the corresponding documentation for
configuration and use the correct cables for connection:
Documentation
Y-Cable
Extension
Cables
Other
Loudspeaker
QL015
SM Voice
Application Note
QM108
Not needed
DriverID Reader
QL460
SM KeyControl
Application Note
QM106
QD221 (1.5m)
KeyCards
SerialExtender
QS430
SM SerialExtender
Application Note
QM103 or
QS422
QD221 (1.5m)
TrackingRadar
QR310
SM TrackingRadar
Installation Manual
QS413
QR321 (2m)
QR322 (5m)
QR323 (10m)
QR324 (20m)
QR320 (CAN Y)
QR421 (Terminator)
Panic Button
QP137
Panic Button
Application Note
Not needed
(GPIO)
Not Needed
3.4.2. QL015 Loudspeaker plus Voice Option
In order to install the SAFEmine Voice option, the CAS system requires the installation of the QL015
loudspeaker for audible output.
The loudspeaker enables the CAS to voice different messages regarding vehicles ahead, collision
warnings, tailgating, over-speed and many more.
For in-depth information on SAFEmine Voice configuration and the installation of QL015
loudspeakers please consult the voice application note.
For further information please contact [e-mail]