Installation Manual

9 Boot-up Process

After connection of components and power up, the boot up process starts automatically.

1. QC1000 LED turns green, goes into green blink every 10s

Power up process of QC1000 can take up to 90 seconds until all network capabilities are

up and running.

2. In parallel, the QD1400 boots up

a. Splash Screen with progress bar advancing

b. Operator ID login (for testing purposes: type in any number)

c. Traffic Awareness Screen

i. Will show a connection error until QC1000 is booted up completely

ii. When error disappears, system is ready to go