Installation Manual

Internal Documents Do not Distribute
24 Commercial in Confidence © Hexagon AB
Battery voltage thresholds are examples. Values are configurable.
5.19 Installation of QC1000
For any vehicle installation, QC1000 must be
• Facing forward (in direction of forward travel)
• Must be mounted horizontally within +/- 15°
• Comply with Radio Interference as in par. 8.1.2
5.19.1 Installation of QC1000 with bracket
Hexagon recommends the installation of QC1000 on a bracket for all permanent installation for its
superior stability even in heavy vibration.
QC1000 has 3 thread insert for M8 screws to be fixed on a corresponding hole pattern of a
bracket.
Battery state \ Move mode
Supply Voltage = 24 V
Driving
(typical values)
Parked
(typical values)
Comment
Normal
Battery normal
5-6W
0.21-0.25A
Display in Sleep
Mode
4-4.5 W
0.17 - 0.19 A
Normal behaviour
Power Save Mode
- Entering when battery voltage
drops below 23.2 V plus 12
hours
- leaving when battery Voltage
rises again above 23.8V
Same as
normal
3.5 - 4W
0.15 - 0.17A
Power saving.
Drain Protect
- Entering when battery voltage
drops below 21.7 V
- leaving when battery voltage
rises again above 24.0V
0.5 W
0.02 A
NO SAFETY
Red LED on QC1000
When voltage is back,
system turns on again.