Installation Manual

© Hexagon AB Commercial in Confidence 11
916132
QM1111 Junction Harness
Smart Antenna Light
Junction harness to branch out
PWR-SER-ETH-3xGPIO from
Cable Smart Antenna light;
Typically used for LV and
Visitor Unit
931480
QM1113 Cable, CAS 10
Ethernet Harness
Harness between Junction
Harness, Ethernet Switch and
Display 5
939550
QM1114 Cable, Ethernet M8-
8F to M12-4M, 0.4m
Cable between Junction-
Harness for secondary Smart
Antenna (beacon) to Ethernet
Switch
945888
QX1120 CAS 10 Ethernet
Switch
Ethernet Switch with 5
Ethernet connection and
power in. Connectors require
M12, 4pin, male D-coded
921244
QM1130 Cable Display 5 2.5m
M8-M (straight) to M8-F, 2.5m,
PWR-ETH; Typically used for
Smart Display
938004
QX1300 CAS 10 Battery Pack
Battery Pack with Power
management for Visitor Unit
950290
L-Bracket, Smart Antenna
Bracket to mount Smart
Antenna on mast or rail
including U-bolts. Includes 3x
screws and spring lock
washers to mount Smart
Antenna
950287
QL1421 RAM mount, Base
Plate diamond
RAM-B-238U
950288
QL1422 RAM mount, Arm
short
RAM-B-201U-A
950291
QL1423 RAM mount, Base
plate round
RAM-B-202U
950286
QL1424 RAM mount, Suction
mount base
RAM-B-224-1U
Suction mount for temporary
installation of QD1400 Display
5 (Visitor Unit) on non-porous,
plain surfaces.
951450
QN1999 CAS 10 Vehicles
Installation Kit
Installation kit for CAS 10,
suits all vehicles. Contains:
- standard screws
- cable ties
- Accessories for DEUTSCH
connectors