Installation Manual

28 Commercial in Confidence © Hexagon AB
7.4 Haul Trucks
7.4.1 System Diagram
7.4.2 QC1000 Location
It is not always possible to position the QC1000 on the topmost location. On haul trucks the
bucket might be covering the entire structure of the vehicle and thus making the installation of an
QC1000 on the top rather impractical. In this case Hexagon recommends using a pole on which
the QC1000 can be mounted. The best position for QC1000 is one of the front corners. If the
vehicles transit on the right side of the road than the left corner is most appropriate and vice
versa. The pictures below show different configurations for pole sizes and positions.
The QC1000 positions in the above drawings are to be avoided: