User manual
Table Of Contents
- Starting right
- Getting to know your computer
- Connecting to a network
- Enjoying entertainment features
- Navigating the screen
- Managing power
- Initiating Sleep and Hibernation
- Using the power meter and power settings
- Running on battery power
- Running on external AC power
- HP CoolSense (select models only)
- Refreshing your software content with Intel Smart Connect Technology (select models only)
- Shutting down (turning off) the computer
- Maintaining your computer
- Securing your computer and information
- Using Setup Utility (BIOS) and HP PC Hardware Diagnostics (UEFI)
- Backing up, restoring, and recovering
- Specifications
- Electrostatic Discharge
- Index
Touch to share (select models only)
Your computer has advanced Near Field Communication (NFC) hardware that allows you to
wirelessly touch-to-share information between two NFC-enabled devices. With NFC technology, you
can share websites, transfer contact information, and tap-to-print on NFC supported printers.
TIP: You can download NFC apps that may provide additional NFC features.
IMPORTANT: Before you can begin sharing, be sure that NFC is enabled on your devices. You
may also need to turn off certain services, such as sBeam, in order for NFC to work on Windows 8
devices. Check your NFC device manufacturer to be sure that it is compatible with Windows 8.
Start sharing
Touch your NFC device to your computer to start sharing between your device and your computer.
1. Open the item you want to share.
2. Touch the two NFC antennas together. You may hear a sound when the antennas have
recognized each other.
NOTE: The NFC antenna on your computer is located on the center, right-side of your
computer screen. Refer to your device instructions to see where its antenna is located.
3. You may see a message on your device asking you to initiate the transfer and a message on
your computer if you want to receive the transfer. Follow the on-screen instructions to accept the
transfer.
ENWW Touch to share (select models only) 29