Maintenance and Service Guide

Speaker
Description Spare part number
Speaker 767958-001
Before removing the speaker, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the top and bottom covers (see
Top and bottom covers on page 15).
5. Remove the back cover (see
Back cover on page 16).
6. Disconnect the battery cable from the system board (see
Battery on page 20).
7. Remove the webcam cable bracket (see
Webcam cable bracket on page 22).
Remove the speaker:
1. Remove the Phillips PM1.4×2.5 screw (1) that secures the speaker to the back cover.
2. Remove the speaker (2).
Reverse this procedure to install the speaker.
26 Chapter 5 Removal and replacement procedures