Maintenance and Service Guide

Webcam cable bracket
Description Spare part number
Webcam cable bracket 775999-001
Before removing the webcam cable bracket, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the top and bottom covers (see
Top and bottom covers on page 15).
5. Remove the back cover (see
Back cover on page 16).
6. Disconnect the battery cable from the system board (see
Battery on page 20).
Remove the webcam cable bracket:
1. Remove the Phillips PM1.4×2.5 screw (1) that secures the webcam cable bracket to the
back cover.
2. Slide the webcam cable bracket (2) away from the retaining tab, and then remove it.
Reverse this procedure to install the webcam cable bracket.
22 Chapter 5 Removal and replacement procedures