Maintenance and Service Guide

RF cable
Description Spare part number
RF cable 776002-001
Before removing the RF cable, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the top and bottom covers (see
Top and bottom covers on page 15).
5. Remove the back cover (see
Back cover on page 16).
6. Disconnect the battery cable from the system board (see
Battery on page 20).
Remove the RF cable:
1. Disconnect the RF cable from the terminals (1) on the RF receiver and the system board.
2. Release the tape (2) that secures the RF cable.
3. Release the RF cable from the two plastic clips (3) built into the back cover.
4. Release the RF cable from the metal clip (4) built into the system board.
5. Remove the RF cable (5).
Reverse this procedure to install the RF cable.
RF cable
21