Maintenance and Service Guide

Battery
Description Spare part number
1-cell, 5000-mAh, Li-ion, USB-charging battery (includes cable) 767954-001
Before removing the battery, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the top and bottom covers (see
Top and bottom covers on page 15).
5. Remove the back cover (see
Back cover on page 16).
WARNING! To reduce potential safety issues, use only the battery provided with the tablet, a
replacement battery provided by HP, or a compatible battery purchased from HP.
CAUTION: Removing a battery that is the sole power source for the tablet can cause loss of
information. To prevent loss of information, save your work or shut down the tablet through the
operating system before removing the battery.
Remove the battery:
1. Disconnect the battery cable (1) from the system board.
2. Detach the three sections of grounding tape (2) that secure the battery to the back cover.
3. Remove the battery (3).
Reverse this procedure to install the battery.
20 Chapter 5 Removal and replacement procedures